WS-SOFT75 Automatic Water Softener
WS-SOFT75 is a 75 litre water softener designed for homes and commercial applications where hard water causes scale buildup. This automatic water softener helps reduce calcium and magnesium hardness in hard and borewell water and helps protect geysers, bathrooms, pipelines and appliances from scale.
- 75 L High-Quality Softening Resin
- Automatic Regeneration Process
- Helps Reduce Hard-Water Scale
- Suitable for Home & Commercial Applications
75 L
Resin Capacity
Automatic
Regeneration
1 Year
Service Support
Book Your FREE Home Water Quality Check in Nagpur
Fill out the form below and our water expert will contact you shortly to schedule your FREE home visit. Available across all major areas of Nagpur.
WS-SOFT75 Key Highlights
Smart features for reliable hard water treatment.
75 L Resin Capacity
Loaded with 75 litres of cation exchange resin for substantial water treatment capacity.
Automatic Regeneration
Automated Multi-Port Valve handles timely backwash and brine recharge cycles automatically.
Hardness Reduction
Exchanges calcium and magnesium hardness ions to condition hard borewell or tap water.
Helps Reduce Scale
Helps protect internal plumbing lines, bathroom fixtures, geysers, and appliances from scale buildup.
Low Maintenance
Requires simple periodic salt replenishment in the brine tank for continuous operation.
Technical Specifications
WS-SOFT75 is a 75 litre water softener designed for homes, villas, offices, guest houses and selected commercial applications where hard water can cause scale buildup. This automatic water softener uses cation exchange softening resin to help reduce hardness caused primarily by calcium and magnesium in water. It is suitable for applications where hard water affects geysers, bathrooms, pipelines, water heaters, fixtures and other water-contact equipment. WS-SOFT75 can also be considered as a water softener for borewell water when hardness is the primary water-quality concern. The system is available with fully automatic and manual MPV configurations according to site requirements. Final sizing and operating configuration should be selected based on raw-water hardness, daily water consumption, required flow rate and other site conditions. WS-SOFT75 is specifically designed for hardness reduction and should not be considered a drinking-water purifier or a system for complete TDS removal.
| Parameter | Specification | Status |
|---|---|---|
| Model | WS-Soft75 | ✓ Confirmed |
| Application | Water Softening | ✓ Confirmed |
| Resin Capacity | 75 Litres | ✓ Confirmed |
| Resin Type | Cation Exchange Softening Resin | ✓ Confirmed |
| Vessel Size | 1354 FRP Vessel | ✓ Confirmed |
| MPV Type | Fully Automatic / Manual MPV | Available |
| Operating Flow Rate | Based on water demand and site requirement | Site Variable |
| Service Flow Rate | Based on vessel, resin volume and application | Site Variable |
| Operating Pressure | Based on installation conditions | Site Variable |
| Regeneration | Automatic | ✓ Confirmed |
| Regeneration Mode | Automatic / Manual | Available |
| Regeneration Interval | Based on water hardness and daily water consumption | Site Variable |
| Brine Tank | Included | ✓ Confirmed |
| Brine Tank Size | Selected according to regeneration requirement | Site Variable |
| Salt Type | Water Softener Salt / Salt Tablets | ✓ Confirmed |
| Salt Consumption per Cycle | Based on regeneration setting and water hardness | Site Variable |
| Inlet Connection | According to MPV and site piping requirement | Site Variable |
| Outlet Connection | According to MPV and site piping requirement | Site Variable |
| Drain Connection | Required for regeneration discharge | Site Variable |
| Hardness Reduction | Calcium & Magnesium Hardness Reduction | ✓ Confirmed |
| Raw Water Hardness | Water test recommended for correct sizing and setting | Site Variable |
| Daily Water Consumption | Required for regeneration calculation | Site Variable |
| Power Requirement | Applicable for automatic valve/controller configuration | Site Variable |
| Installation | Configuration based on site conditions | Site Variable |
How It Works
A simple overview of the ion-exchange softening and regeneration process.
Softening Process
Service RunRegeneration Process
Automatic CycleApplications
WS Soft-75 is suitable for a wide range of residential, commercial, and groundwater setups.
Home
Provides scale protection for whole-house piping, bathrooms, geysers, and appliances.
Villa
Ideal for independent villas with high daily usage, multiple bathrooms, and solar heaters.
Office
Protects commercial pantry equipment, coffee machines, restrooms, and plumbing lines.
Guest House
Maintains scale-free fixtures and consistent hot water for guest bathrooms and laundry.
Small Commercial
Reliable softened water for salons, cafes, laundromats, and light commercial facilities.
Borewell Water Applications
Treats hard groundwater with high calcium and magnesium content across various setups.
WS-Soft75 Automatic Water Softener is a 75-litre water softening system designed to reduce hardness caused primarily by calcium and magnesium in hard water. It is suitable for homes, villas, offices, guest houses and selected commercial applications where hard water can lead to scale formation in geysers, bathroom fixtures, pipelines, water heaters and other appliances. WS-Soft75 uses high-quality cation exchange softening resin to exchange hardness-causing calcium and magnesium ions, helping provide softer water for everyday use. The system is available with fully automatic and manual multi-port valve (MPV) configurations, allowing the setup to be selected according to the customer’s site requirements and operating preferences. For borewell water applications, the system can be considered where hardness is the primary concern; however, final sizing and configuration should be based on raw-water hardness, daily water consumption, iron level, required flow rate and site conditions. WS-Soft75 is a water softener, not an RO purifier, and it is designed specifically for hardness reduction rather than TDS removal or drinking-water purification.
WS-SOFT75 Automatic Water Softener is a 75 litre water softening system designed to reduce hardness caused primarily by calcium and magnesium in hard water. It is suitable for homes, villas, offices, guest houses and selected commercial applications where hard water can cause scale formation in geysers, bathroom fittings, pipelines, water heaters and other water-contact equipment. WS-SOFT75 uses cation exchange softening resin to exchange hardness-causing calcium and magnesium ions, helping provide softer water for everyday use. The system is available with fully automatic and manual multi-port valve (MPV) configurations, allowing the setup to be selected according to site requirements and operating preferences. For borewell water applications, WS-SOFT75 can be considered where hardness is the primary water-quality concern. Final sizing and configuration should be based on raw-water hardness, daily water consumption, required flow rate and other relevant water-quality parameters. WS-SOFT75 is a water softener, not an RO purifier, and it is designed specifically for hardness reduction rather than complete TDS removal or drinking-water purification.
Frequently Asked Questions
Quick answers about WS-Soft75 water softener, hardness reduction, automatic regeneration, salt usage, installation and maintenance.
What is WS-Soft75?
WS-Soft75 is a 75-litre resin capacity automatic water softener designed to reduce hardness-causing minerals such as calcium and magnesium from water. It is suitable for residential and selected commercial applications where hard water is causing scale formation.
What problem does a water softener solve?
A water softener helps reduce calcium and magnesium hardness that can cause scale deposits in geysers, shower fittings, taps, pipelines, heaters and other water-contact equipment. It can also improve soap and detergent performance in hard-water conditions.
Can WS-Soft75 be used for borewell water?
Yes. WS-Soft75 can be considered for borewell and groundwater applications where hardness is the main issue. However, borewell water should ideally be tested for hardness, TDS, iron, manganese and other relevant parameters before final system sizing and configuration.
Does WS-Soft75 remove TDS?
No. A water softener is not a TDS-removal system. It primarily targets hardness-causing calcium and magnesium through ion-exchange. TDS may not reduce significantly because other dissolved salts remain in the water.
Is WS-Soft75 a drinking-water purifier?
No. WS-Soft75 is designed for water softening and scale control, not complete drinking-water purification. If drinking-water purification is required, an appropriate RO, UV, UF or other treatment system should be selected based on the raw-water quality and application.
How does the automatic regeneration process work?
During normal operation, hard water passes through the softening resin. When regeneration is required, the control valve initiates the programmed regeneration sequence. A salt-brine solution is used to recharge the resin, while the hardness removed during regeneration is discharged to the drain.
How often does WS-Soft75 need regeneration?
Regeneration frequency is not the same for every installation. It depends mainly on raw-water hardness, daily water consumption, resin working capacity, salt dose and the programmed valve settings. A water test and actual usage are recommended for final programming.
How much salt does WS-Soft75 consume?
Salt consumption depends on the resin working capacity, hardness load and regeneration setting. Therefore, a fixed kg-per-cycle figure should not be assumed for every site. The actual salt requirement can be estimated after checking raw-water hardness and daily consumption.
Does the automatic WS-Soft75 require electricity?
Electricity requirement depends on the selected control configuration. Automatic valve/controller configurations generally require electrical power for automatic operation, while manual valve configurations work through manual operation. Final power details depend on the selected valve/controller.
Can WS-Soft75 be used for a complete house?
Yes, it can be used for whole-house water softening when properly sized for the property's water demand. Homes with multiple bathrooms, geysers, kitchen utility lines and high daily consumption should be evaluated based on peak flow, daily usage and raw-water hardness.
Is WS-Soft75 suitable for 3 bathrooms and 1 kitchen?
It may be suitable, but the correct configuration should be confirmed from daily water consumption, peak flow requirement and water hardness. The number of bathrooms alone is not sufficient for final sizing. A site assessment or water test gives a more reliable recommendation.
What maintenance does WS-Soft75 require?
Routine maintenance generally includes checking the salt/brine system, keeping the salt supply adequate, inspecting the control valve and connections, checking for leaks and verifying regeneration performance. Periodic servicing should be carried out according to actual site conditions and system configuration.
What type of salt is used in the water softener?
Regeneration uses salt to prepare the brine solution required for resin regeneration. For reliable operation, suitable water-softener salt should be used as recommended for the installed system and valve configuration.
What happens to the water during regeneration?
During regeneration, the resin is cleaned and recharged using brine. The regeneration wastewater containing the removed hardness and spent brine is directed to the drain connection. Proper drain provision should therefore be available at the installation site.
Will softened water stop scale completely?
Properly operated softening can significantly reduce hardness-related scale formation, but actual results depend on raw-water quality, system sizing, resin condition, regeneration settings and installation. Regular maintenance and correct programming are important for consistent performance.
How do I know whether WS-Soft75 is the right model for my property?
The right configuration depends on water hardness, daily water consumption, peak flow, application and available installation space. WaterSupplier can evaluate these factors and recommend the suitable configuration before installation.
Not Sure Which Configuration You Need?
Share your water hardness, daily water usage and property requirements. We can help you identify the suitable WS-Soft configuration.